Eliminates Water: Water will always be present because of the heating and cooling of components in an engine. Diesel fuel used as the source of combustion contains sulfur small amounts of fuel will pass by the piston rings and end up in the oil. The sulfur will mix with the water resulting in sulfuric acids. Using the kleenoil Bypass Filter System will remove all water down to less than 0.05%, reducing the formation of sulfuric acid that will cause accelerated wear to engine components.
Removes Dirt And Contaminants: Dirt and wear metals will be present in hydraulic and engine oil. The resons that most fluid changes are done is to get rid of the dirt and contaminants conventional fluid components will filter the fluid down to approximately 10 macron in size. Accelerated wear and damage occurs somewhere around 3 – 6 micron using the kleenoil bypass filter system you will filter the fluid down to 1-macron in size reducing the chance of wear and ultimately reducing the number of engine failures and rebuilds that would be needed to be performed during the life of the unit.
Doesn’t Remove Desirable Elements: Certain components are purposely placed in lubrication oil to make it effective. Some of the addictive include dispersant, detergents, oxidation and rust inhibitors, pour-point depressants, metals de-activators and anti foaming and gelling agents. While the kleenoil bypass filter system is removing dirt, contaminants, wear metal particles and water; it is not removing the oil addictive needed for continued use.
Extends Drain Intervals: Because of the reasons mentioned above, oil can run longer as it is kept clean, free of water and still maintain its addictive package. Proper oil analysis will indicate the life of the oil but an average the drain is extended up to 10 times what it would be without the kleenoil bypass filter system.
Reduces Time Needed For Service: Changing the kleenoil filter cartridge requires much less time than what is required to perform a conventional full fluid change. Simply remove the lid from the container, remove the old cartridge and install the new cartridge and seal. All this can be performed in less than 10 minutes and without the worry of spilling oil and disposing of contaminated fluids.
Continuous Protection Provided: The Kleenoil filter system is installed to filter the fluid whenever there is oil pressure. Once the engine or the hydraulic pump is activated and there is fluid pressure, the fluid is continuously passing through the densely wound filter wound filter cartridge. The cartridge is wound with pure coniferous long liver wood pulp paper. This design allows the water to be extracted from the fluid and still allows the larger oil molecules to pass through unchanged. The dark and wear particles are trapped in the filter giving you a continous self contained recycling system.
Good For The Environment: Because the fluid is being recycled of its own application, longer drain intervals can be realized. Oil is a finite resources that one day will run out. Keeping the fluid running longer reduces the amount of oil you will have to purchase throughout the now extended life of the unit. Disposing of the used contaminated oil also creates a risk to the environment. Proper disposing methods are needed to safeguard the environment for our children. Reducing the amount of fluid that has to be disposed, is one way of reducing the impact of the already taxed environment. Whenever a full fluid change is required to be done, there is always a risk of spills and ground contamination. Reducing the number of full drains reduces the risk dramatically.